j-FiberUnit 40
 |
j-FiberUnit 40
The new j-fiber solution to enable parallel 40 Gb/s Ethernet transmission for highly flexible cable installations
Advanced cabling in Datacenters demands for higher data rate transmission already today while reducing network complexitiy and costs. j-FiberUnit 40 is j-fiber's new solution for 40 Gb/s OM3 parallel high-bandwidth transmission.
j-fiber FiberUnit 40 uses 4 j-fiber OptiGrade OM3 multimode fibers with 10Gb/s data-rate transmission capacity each.
Unlike current fiber ribbon constructions, j-FiberUnit has no preferential bend limitation. With a minimum skew value far below the required ≤0.75ns (run time differences between the fibers) j-FiberUnit 40 ensures reliable 40 Gb/s parallel transmission. With a link length over up to 150m j-FiberUnit 40 performs even beyond approved IEEE objectives and thereby allows to make IT cabling installations in advanced datacenters future-safe, well-structured and cost-efficient.
The new j-fiber solution to enable parallel 40 Gb/s Ethernet transmission for highly flexible cable installations
Advanced cabling in Datacenters demands for higher data rate transmission already today while reducing network complexitiy and costs. j-FiberUnit 40 is j-fiber's new solution for 40 Gb/s OM3 parallel high-bandwidth transmission.
j-fiber FiberUnit 40 uses 4 j-fiber OptiGrade OM3 multimode fibers with 10Gb/s data-rate transmission capacity each.
Unlike current fiber ribbon constructions, j-FiberUnit has no preferential bend limitation. With a minimum skew value far below the required ≤0.75ns (run time differences between the fibers) j-FiberUnit 40 ensures reliable 40 Gb/s parallel transmission. With a link length over up to 150m j-FiberUnit 40 performs even beyond approved IEEE objectives and thereby allows to make IT cabling installations in advanced datacenters future-safe, well-structured and cost-efficient.
 |
 |
Picture: j-FiberUnit 40
Specification FiberUnit 40
| j-FiberUnit 40 | Specified Values | Unit |
| Number of Fibers in Unit | 4 | |
| Max. attenuation in unit at 850nm Max. attenuation in unit at 1300nm | <2.6 <0.8 | dB/km dB/km |
| Skew | <0.75 | ns |
| Transmission link length | <150 | m |
| Outside Diameter | 850 +/- 50 | µm |
| Color set fibers | 2 color sets for duplex deployment | |
| Buffer material | UV cured Acrylate | |
| Color buffer material | Clear | |
| Filling compound | Easy removable gel | |
| Operating Temperature Range | -40 to +80 | C |
Specification Fiber
| OptiGrade 50/125/250 OM3 Fiber | Specified Values | Unit | |
| Fiber type | OptiGrade 50/125/250 OM3* | ||
| Core diameter | 50 +/- 2.5 | µm | |
| Cladding diameter | 125 +/- 1.0 | µm | |
| Coating diameter | 245 +/- 10.0 | µm | |
| Numerical Aperture | 0.200 +/- 0.015 | ||
| Effective Group Index of Refraction | 850nm 1300nm | 1.483 1.478 |
*See j-fiber OptiGrade Multimode Fiber Series Datasheet for details
| Colors according to IEC 60304 | Color | |
| j-FiberUnit A | red | |
| green | ||
| blue | ||
| yellow | ||
| j-FiberUnit B | white | |
| grey | ||
| brown | ||
| purple | ||
Other colors and color combinations available upon request.
Flexible Use. Best Skew. High Link-Lengths.
Coming soon: Watch out for j-FiberUnit 100 using 10 fibers to allow for 100Gb/s data rate transmission!
- No preferential bend limitation
- Enables 40 Gb/s transmission using 4 OM3 OptiGrade fibers
- Up to 150m link-length
- Excellent skew values of far below ≤0.75 ns
- Easy removable buffer material
- Different color coded fiber sets for full 40Gb/s duplex operation
Coming soon: Watch out for j-FiberUnit 100 using 10 fibers to allow for 100Gb/s data rate transmission!
Ordering Information
To order our j-FiberUnit 40 product please call, fax or email us and specify the following parameters when ordering:
To order our j-FiberUnit 40 product please call, fax or email us and specify the following parameters when ordering:
| Desired Attenuation | at 850nm/1300nm | ||||
| Unit Quantity | m/km | ||||
| Other | desired ship date reel length special requests | ||||
top
print page